AUKO Frigidaire/ Electrolux 137221600 Washer Drain Pump
The pump motor is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
This part works with the following brands: Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
Reference Information Part Number 137221600 (AP5684706) replaces 131724000, 134051200, 134740500, 137108100, 137151800, 137151800KITK, 2754548, ER137108100, PS7783938, TJ137108100.
Fixing the following symptoms
Washer Will not drain.
Pumps but will not spin.
? Unplug washer.
? Open the washer and locate the pump.
? Unplug the wires from the pump.
? Remove two hoses (use a large pliers on the hose clamps).
WARNING: both hoses will have water in them, so have a plan for the water -- if the washer is full, it will probably best to bail it out before removing the hoses.
? Remove the old pump by unscrewing two screws.
Note: The plastic shield comes off of the pump -- you may need to remove it to reach the screws. Examine the new pump to determine how to remove the shield (it's easy).
? Reverse these steps to install the new pump.
1x Washer Drain Pump Motor 137221600
?137221600 Electrolux Frigidaire drain pump.
?Part number 137221600 replaces 137108100, 134051200, AP5684706, 137151800KITK, 137151800, 131724000, 134051200, 134740500, 2754548, ER137108100, PS7783938, TJ137108100.
?WARM TIPS - Make sure you clean out the boot between the pump and the drain line before you replace the pump. Clogging in the line probably caused your pump to fail in the first place.
?For any question you are not happy with the item, you can ask for a new replacement or full refund under our MONEY BACK GUARANTEE.