3.5kW/120V Electric Tankless Water Heater

Price: $99.99
Product prices and availability are accurate as of 2018-08-06 19:10:37 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Perfect for hand washing sinks, this unit is specifically designed for a single sink application in moderate to warm climates (see sizing guide) with a suggested flow rate of 0.5 Gallon per minute (gpm) for optimal performance. Please keep in mind higher flow rate = lower temperature rise. Designed to work for both 110V and 120V. Wattage is based on maximum voltage. 120V will draw 3500 watts. 110V will draw 3000 watts. Energy efficient, save up to 50 percent of water heating costs. Perfect for residential and commercial use. For assistance prior to purchasing this unit, please call 18887836082 or e-mail info@paragongroupusa.Com. 3kW/110V Electric Tankless Water Heater. Unit requires, 30A dedicated breaker, 10 AWG WIRE (Line, Ground, Neutral), and 110V Service. Included in Packaging, Pressure Relief Valve (MUST be installed to Inlet Cold Water Connection), 0.5 Inch NPT Fittings, and Owners Manual. MUST be installed by a licensed professional according to the specifications listed in the Owners Manual. NOT a Plug in Unit, at no time can a plug be installed to the unit. This unit is designed for a single sink application ONLY. This unit is NOT made for cold climates with inlet water less than 51F. 0.5 GPM (Gallons per Minute) is necessary to activate unit. (Purchase separately) 0.5 GPM (Gallon Per Minute) sink aerator for optimal heating performance. Unit will ONLY power on with water flow.

Product Features

0.5 flow rate = 45° F temperature rise. Higher temperature rise = lower flow rate Perfect for hand washing. Designed for single sinks in warm to moderate climates Designed to work for both 110V and 120V. Wattage is based on maximum Voltage. 120V will draw 3500 watts. 110V will draw 3000 watts Save up to 50% of water heating costs. Water heats on demand Must be installed by a licensed professional. Must be hardwired into dedicated 30a breaker. 10 AWG required

Write a Review