Dayton 4HU74 Pump, Effluent, 1/2 HP

Price: $510.00
Product prices and availability are accurate as of 2018-12-01 07:57:16 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Submersible Effluent Pump, HP 1/2, Volts 240, Amps 5.8, Single Phase, Cord Length 20 Ft, Operation Automatic/Piggyback Float, Max Solids 3/4 In, Max Temp 104 F, Discharge NPT 1 1/2 In, Motor Type PSC, Motor Design Oil Filled, RPM 3450, Switch Type Tether, GPM of Water @5 Ft of Head 90, @25 Ft of Head 35, Shut Off 31 Ft, Base Cast Iron, Housing Cast Iron, Impeller Cast Iron, Mechanical Seal Material Silicon Carbide, Bearing Type Ball, Height 12 3/4 In, Dia 8 1/2 In

Product Features

Price For: Each Item: Submersible Effluent Pump Switch Type: Tether Impeller Material: Cast Iron Item: Submersible Effluent Pump HP: 1/2 Voltage: 230V Amps: 4.3 Shaft Seal: Silicon Carbide/Buna N GPM of Water @ 5 Ft. of Head: 85 GPM of Water @ 10 Ft. of Head: 78 GPM of Water @ 20 Ft. of Head: 52 GPM of Water @ 15 Ft. of Head: 65 GPM of Water @ 25 Ft. of Head: 35 GPM of Water @ 30 Ft. of Head: 10 Phase: 1 Duty: Intermittent Motor Type: Oil Filled PSC Bearing Type: Ball Diameter: 9-1/8" Handle: Yes Cord Length: 20 ft. Top Material: Cast Iron On Point: 13-1/4" Width: 8-1/2" Off Point: 4-1/4" Motor RPM: 3450 Max. Head: 31 ft. Base Material: TPL Pump RPM: 3450 Length: 12-3/4" Discharge NPT: 1-1/2" Min. Sump Pit Dia.: 18" Height: 13" Max. Liquid Temp.: 104 Degrees F Hz: 60 Max. Dia. Solids: 3/4" Housing Material: Cast Iron Country of Origin (subject to change): China

Write a Review